Have you ever thought about changing the world? Or at least about creating some innovative tools or solutions for some problems? Or maybe you have already proposed to the society something unique that wasn’t introduced earlier? If you have given a positive response at least to one of this questions, you obviously have much in common with your mobile operator – Jio.
This company wasn’t afraid to go all in. With a view to begin its way of innovating the sphere of mobile communications in India, Jio was established as LTE-only mobile services provider. Jio doesn’t provide any services on the base of 2G and 3G networks but it doesn’t limit its services with mobile internet. For calls it has VoLTE (voice over LTE) services. In comparison to other providers BSNL, Vodafone IN, Reliance Communications, Bharti Airtel, Jio is the only one mobile communications services provider in India that has taken a risk to focus only on LTE technology. And without any doubts it is a win-win situation both for the company and its subscribers.
Cell Phone boosters or cell phone repeaters are devices that have been developed to solve the problem of weak cell phone reception. They have been designed specifically to amplify a weak signal available outside a house, building or a vehicle, and to broadcast a much stronger signal inside, where it is needed the most.
We shall discuss in detail how these devices work, but let us first answer the question, are cell phone signal boosters legit? Yes, they most certainly are and have been approved by the FCC in United States and Industry Canada (IC) in Canada.
The FCC has no issue with using cell phone repeaters to extend the range of a cell network in areas that historically receive poor cellular service, including homes and offices, commercial structures and more as long as they are registered with respective service provider before use.
Introduction of Mobile Phone Signal Repeater
1. Enhance Mobile Phone Signal Strength
2. Improve Communication Quality
3. Reduce Cellphone Radiation
4. Protract Cellular Battery Life
5. Economic Building Cost
6. Easy Operation
7. Easy Installation
8. Build-in Power Supply
Specification of mobile phone signal repeater
| Frequency | 1800/2300MHz |
| Frequency Range | Uplink 1710-1785MHz / 2300-2400MHz |
| Downlink 1805-1880MHz / 2300-2400MHz | |
| Gain | Uplink 60±3dBi |
| Downlink 65±3dBi | |
| Export Power | 20dBm±3dBm |
| Power Supply | Input AC100V-240V 50/60Hz 0.6A |
| Output 12V 2.0A | |
| Size | 196 x 127 x 19 mm |
| Weight | 0.85kg |
| Coverage Area | 1000sqm |
| Pass Band Ripple | ≤3dBi |
| I/O Impedance | 50Ω |
| Connector Type | N female connector |
| Noise Figure | ≤4dBi |
| Transmission Delay | ≤0.5μs |
| Ambient Temperature | -10ºC~60ºC |
| Reliability | To the GB6993-86 standard |
| Electromagnetic Compatibility | To the ETS300 694-4 standard |
| Function | a) Power supply LED denote |
| b) Export power LED denote |
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you.
1.The outside antenna receives the signal from the nearest mobile base station.
2.The outside antenna sends the received signal through the coaxial cable to the installed Repeater.
3.The repeater accepts the low signal and improves it.
4.The improved signal goes to the inside antenna through the coaxial cable.
5.The inside antenna send the improved good signal to your mobile phone.
| Item | Quantity |
| Signal booster | 1pc |
| Outdoor log periodic antenna | 1pc |
| 15m LMR300 cable with connectors | 1pc |
| Power adaptor | 1pc |
| User manual | 1pc |
| 5m LMR300 cable with connectors | 1pc |
| Indoor ceiling antenna | 1pc |
1.Please make sure the outdoor antenna is well isolated with the indoor antenna(s). They should not be on the same horizontal line. The outdoor antenna should be on the housetop, at least 10 meters far away from the indoor antenna(s), better with stairs or wall(s) in between. Put the indoor antenna(s) in the middle of room, far away from the window and door.
2.If still no signal reception after activating repeater, please check if outdoor antenna points to signal tower or elsewhere have strong signal and check if strength achieve -70dBm. Please adjust the direction of the outdoor antenna until it catches good and steady signal. To ensure the result, the outdoor signal should be as strong as possible.
3.More indoor antennas and splitters/couplers are needed for bigger indoor coverage as one indoor antenna can cover around 100-250 square meters Installation Diagram for More Indoor Antennas
