Home mini GSM 2G single band cell phone booster
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Frequency Range | Uplink 890-915MHz |
Downlink 935-960MHz |
Gain | Uplink 60±3dBi |
Downlink 65±3dBi |
Export Power | 17dBm±3dBm |
Power Supply | Input AC100V-240V 50/60Hz |
Output 5V 2000mA |
Size | 163 x 108 x 19mm |
Weight | 0.6kg |
Coverage Area | 500m2 |
Pass Band Ripple | ≤3dBi |
I/O Impedance | 50Ω |
Connector Type | N female connector |
Noise Figure | ≤4dBi |
Transmission Delay | ≤0.5μs |
Ambient Temperature | -10ºC~60ºC |
Reliability | To the GB6993-86 standard |
Electromagnetic Compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote |
b) Export power LED denote |
How Booster/Repeater Works?
Repeaters are designed to fulfill the idea of one and main principle: to fill the areas with the weak or bad signal and to amplify these low signals in order to provide you with the communication suitable for you.
Reasons to Purchase Cell Phone Repeater.
Mobile Phone Signal Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
3. Reduce Cellphone Radiation |
4. Protract Cellular Battery Life |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
Steps that describe the work of Repeater.
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal through the coax cable to the installed Repeater.
3) The repeater accepts the low signal and improves it.
4) The improved signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the improved good signal to your mobile phone.
Outdoor
Log-periodic antenna / sucker antenna /
Yagi antenna / panel antenna / fiberglass antenna
Indoor
Whip antennas / ceiling antenna /
Panel antenna / fiberglass antenna
Coaxial-cable (50/5, 75/7, 50/3, RG58U etc)
5m, 10m, 15m, 20m etc
Related products:
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to “BTS/outdoor” port in repeater machine through cable.
- Connect indoor antenna(s) to “Mobile/indoor” port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If can not call out, please adjust the direction of outdoor antenna.
- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least, with a wall between and not at the same horizontal line(outdoor antenna can be one floor higher than the repeater and indoor antenna).
- Indoor antenna and repeater better to be minimum 4 meters far away from nearby windows and doors.
Note:
To use this product to enlarge your signal, the outdoor signal shall be as good as possible. The product will not work well if our outdoor signal is not good or bad.
In case the indoor signal is always very low while outdoor signal is very good, the repeater can work well. If the indoor signal is sometimes full sometimes not at all before installing, this environment is not suitable to install the repeater.
Our Services
1.Sample Orders are supported. OEM service is available. We can make customized logo on product and packaging per requirement.
2.We have 24 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.